The quick setup flow (recommended for first-time users) silently defaulted
terminal.backend to 'local' without ever presenting the choice. This meant
new users who wanted Docker, SSH, Modal, Daytona, or any other backend had
to know about 'hermes setup terminal' — which most wouldn't discover until
later.
Now the quick setup flow is:
1. Provider selection
2. API key
3. Terminal backend (local/Docker/Modal/SSH/Daytona/Vercel/Singularity)
4. Messaging platform
5. Done
The terminal backend is a foundational decision (where ALL commands run)
and belongs in the onboarding path alongside provider selection.
The setup wizard dropped non-root users at a bare shell prompt when
trying to start a system-scope gateway service. Previously
_require_root_for_system_service called sys.exit(1), which the
wizard's `except Exception` guards cannot catch (SystemExit is a
BaseException). Users with a pre-existing /etc/systemd/system unit
(e.g. from an earlier `sudo hermes setup` run) hit this whenever
they re-ran `hermes setup` as a regular user.
- Convert _require_root_for_system_service to raise a typed
SystemScopeRequiresRootError (RuntimeError subclass) instead of
sys.exit(1). The direct CLI path (`hermes gateway install|start|stop|
restart|uninstall` without sudo) still exits 1 cleanly via a new
catch at the top of gateway_command, matching the existing
UserSystemdUnavailableError pattern.
- Add _system_scope_wizard_would_need_root() pre-check and
_print_system_scope_remediation() helper. Both setup wizards
(hermes_cli/setup.py and hermes_cli/gateway.py::gateway_setup) now
detect the dead-end before prompting and print actionable guidance:
either `sudo systemctl start <service>` this time, or uninstall the
system unit and install a per-user one.
- Defense-in-depth: all 5 wizard prompt sites also catch
SystemScopeRequiresRootError and fall back to the remediation
helper if the pre-check is bypassed (race, etc.).
Tests: 12 new tests in TestSystemScopeRequiresRootError,
TestSystemScopeWizardPreCheck, TestSystemScopeRemediationOutput, and
TestGatewayCommandCatchesSystemScopeError covering the exception
contract, pre-check matrix (root vs non-root, system-only vs
user-present vs none vs explicit system=True), remediation output
for each action, and the direct-CLI exit-1 path.
Adds SearXNG as a free, self-hosted web search provider. SearXNG is a
privacy-respecting metasearch engine that requires no API key — just a
running instance and SEARXNG_URL pointing at it.
## What this adds
- `tools/web_providers/searxng.py` — `SearXNGSearchProvider` implementing
`WebSearchProvider` (search only; no extract capability)
- `_is_backend_available("searxng")` — gates on SEARXNG_URL
- `_get_backend()` — accepts "searxng" as a configured value; adds it to
auto-detect candidates (lower priority than paid services)
- `web_search_tool` — dispatches to SearXNG when it is the active backend
- `check_web_api_key()` — includes SearXNG in availability check
- `OPTIONAL_ENV_VARS["SEARXNG_URL"]` — registered with tools=["web_search"]
- `tools_config.py` — SearXNG appears in the `hermes tools` provider picker
- `nous_subscription.py` — `direct_searxng` detection, web_active / web_available
- `setup.py` — SEARXNG_URL listed in the missing-credential hint
- 23 tests covering: is_configured, happy-path search, score sorting, limit,
HTTP/request errors, _is_backend_available, _get_backend, check_web_api_key
## Config
```yaml
# Use SearXNG for search, any paid provider for extract
web:
search_backend: "searxng"
extract_backend: "firecrawl"
# Or: SearXNG as the sole backend (web_extract will use the next available)
web:
backend: "searxng"
```
SearXNG is search-only — it does not implement WebExtractProvider. Users
who only configure SEARXNG_URL get web_search available; web_extract falls
back to the next available extract provider (or is unavailable if none).
Closes#19198 (Phase 2 Task 4 — SearXNG provider)
Ref: #11562 (original SearXNG PR)
Strip bracketed-paste control sequences from setup prompt input so pasted API keys work on Linux and WSL terminals, and add regression tests for normal/password prompts.
Closes#16491
Guard the save_env_value('AUXILIARY_VISION_MODEL', ...) call with
'if _selected_vision_model:' so blank input at the non-OpenAI vision
model prompt doesn't nuke existing values in .env.
save_env_value has no internal guard against empty strings — it
faithfully writes whatever it receives, including empty values that
shadow the previously-configured model.
Salvage of #15504 (core hunk). Contributor's test was dropped because
it collided with subsequent test refactors; the fix stands on its own.
Co-authored-by: alt-glitch <balyan.sid@gmail.com>
Create a timestamped backup (~/.hermes/config.yaml.bak.YYYYMMDD_HHMMSS)
before the setup wizard runs any configuration sections. After setup
completes, show the backup path and a restore command.
This protects user-customized values (compression thresholds, provider
routing, PII redaction, auxiliary model configs) from being silently
overwritten by setup defaults.
Addresses #3522
_setup_slack() was the only platform setup function that did not prompt
for a home channel. All four sibling setups (_setup_telegram,
_setup_discord, _setup_mattermost, _setup_bluebubbles) close with an
identical home-channel block, and setup_gateway() already checks for
SLACK_HOME_CHANNEL presence at the end of the wizard — but the value
was never collected, leaving cron delivery and cross-platform
notifications silently broken for Slack after a fresh hermes setup run.
Add the standard home-channel prompt at the end of _setup_slack(),
symmetric with the Discord implementation. Add two unit tests that
verify the prompt is saved when provided and skipped when left blank.
The old CWD heuristic was fooled by:
1. TERMINAL_CWD persisted to .env by `hermes config set terminal.cwd`
2. Inherited TERMINAL_CWD from parent hermes processes
3. Only resolved when config had a placeholder value (not explicit paths)
Fix:
- load_cli_config() unconditionally uses os.getcwd() for local backend
- TERMINAL_CWD always force-exported in CLI mode (overrides stale values)
- Gateway sets _HERMES_GATEWAY=1 marker so lazy cli.py imports don't clobber
- Remove terminal.cwd from config-set .env sync map (prevents re-poisoning)
- Clarify setup wizard label as 'Gateway working directory'
Closes#19214
CLI/TUI sessions on the local backend now unconditionally use
os.getcwd() as the working directory. The terminal.cwd config value is
only consumed by gateway/cron/delegation modes (where there's no shell
to cd from).
Previously, 'hermes setup' would write an absolute path (e.g. $HOME)
into terminal.cwd which then pinned the CLI to that directory regardless
of where the user launched hermes from. This was a silent foot-gun —
the user's 'cd' was being ignored.
Changes:
1. cli.py: Restructured CWD resolution — if TERMINAL_CWD is not already
set by the gateway, and the backend is local, always use os.getcwd().
Config terminal.cwd is irrelevant for interactive CLI/TUI sessions.
2. setup.py: Moved the cwd prompt from setup_terminal_backend() to
setup_gateway(). It now only appears when configuring messaging
platforms and is labeled 'Gateway working directory'.
3. Tests: Rewrote test_cwd_env_respect.py to validate the new behavior:
explicit config paths are ignored for CLI, gateway pre-set values are
preserved, non-local backends keep their config paths.
4. Docs: Updated configuration.md, profiles.md, and
environment-variables.md to clarify that terminal.cwd only affects
gateway/cron mode on local backend.
Closes#19214
Point users to xAI's custom voices feature — clone your voice in the
console, paste the voice_id into tts.xai.voice_id. No code changes
needed; the existing TTS pipeline already handles arbitrary voice IDs.
- config.py: link to xAI custom voices docs in voice_id comment
- setup.py: prompt accepts custom voice IDs during xAI TTS setup
- tts.md: short section linking to xAI console and docs
* fix(gateway): config.yaml wins over .env for agent/display/timezone settings
Regression from the silent config→env bridge. The bridge at module import
time is correct for max_turns (unconditional overwrite), but every other
agent.*, display.*, timezone, and security bridge key was guarded by
'if X not in os.environ' — so a stale .env entry from an old 'hermes setup'
run would shadow the user's current config.yaml indefinitely.
Symptom: agent.max_turns: 500 in config.yaml, HERMES_MAX_ITERATIONS=60
in .env from an old setup, and the gateway silently capped at 60
iterations per turn. Gateway logs confirmed api_calls never exceeded 60.
Three changes:
1. gateway/run.py: drop the 'not in os.environ' guards for all agent.*,
display.*, timezone, and security.* bridge keys. config.yaml is now
authoritative for these settings — same semantics already in place
for max_turns, terminal.*, and auxiliary.*. Also surface the bridge
failure (previously 'except Exception: pass') to stderr so operators
see bridge errors instead of silently falling back to .env.
2. gateway/run.py: INFO-log the resolved max_iterations at gateway
start so operators can verify the config→env bridge did the right
thing instead of chasing a phantom budget ceiling.
3. hermes_cli/setup.py: stop writing HERMES_MAX_ITERATIONS to .env in
the setup wizard. config.yaml is the single source of truth. Also
clean up any stale .env entry left behind by pre-fix setups.
Regression tests in tests/gateway/test_config_env_bridge_authority.py
guard each config→env key against the 'stale .env shadows config' bug.
* fix(gateway): shutdown + restart hygiene (drain timeout, false-fatal, success log)
Three issues observed in production gateway.log during a rapid restart
chain on 2026-05-02, all fixed here.
1. _send_restart_notification logged unconditional success
adapter.send() catches provider errors (e.g. Telegram 'Chat not found')
and returns SendResult(success=False); it never raises. The caller
ignored the return value and always logged 'Sent restart notification
to <chat>' at INFO, producing a misleading success line directly
below the 'Failed to send Telegram message' traceback on every boot.
Now inspects result.success and logs WARNING with the error otherwise.
2. WhatsApp bridge SIGTERM on shutdown classified as fatal error
_check_managed_bridge_exit() saw the bridge's returncode -15 (our own
SIGTERM from disconnect()) and fired the full fatal-error path,
producing 'ERROR ... WhatsApp bridge process exited unexpectedly' plus
'Fatal whatsapp adapter error (whatsapp_bridge_exited)' on every
planned shutdown, immediately before the normal '✓ whatsapp
disconnected'. Adds a _shutting_down flag that disconnect() sets
before the terminate, and _check_managed_bridge_exit() returns None
for returncode in {0, -2, -15} while shutting down. OOM-kill (137)
and other non-signal exits still hit the fatal path.
3. restart_drain_timeout default 60s → 180s
On 2026-05-02 01:43:27 a user /restart fired while three agents were
mid-API-call (82s, 112s, 154s into their turns). The 60s drain budget
expired and all three were force-interrupted. 180s covers realistic
in-flight agent turns; users on very-long-reasoning models can still
raise it further via agent.restart_drain_timeout in config.yaml.
Existing explicit user values are preserved by deep-merge.
Tests
- tests/gateway/test_restart_notification.py: two new tests assert INFO
is only logged on SendResult(success=True) and WARNING with the error
string is logged on SendResult(success=False).
- tests/gateway/test_whatsapp_connect.py: parametrized test for
returncode in {0, -2, -15} proves shutdown-time exits are suppressed;
separate test proves returncode 137 (SIGKILL/OOM) still surfaces as
fatal even when _shutting_down is set.
- _check_managed_bridge_exit() reads _shutting_down via getattr-with-
default so existing _make_adapter() test helpers that bypass __init__
(pitfall #17 in AGENTS.md) keep working unmodified.
Platform plugins shipped in-repo under plugins/platforms/ should be
available out of the box — users shouldn't have to add 'irc-platform'
to plugins.enabled before they can pick IRC from the gateway setup menu.
Adds a new ``kind: platform`` plugin type that mirrors the existing
``kind: backend`` auto-load semantics:
- Bundled (shipped in the hermes-agent repo): auto-load unconditionally.
- User-installed (~/.hermes/plugins/): still opt-in via plugins.enabled
so untrusted code doesn't silently run.
Changes:
* hermes_cli/plugins.py: add 'platform' to _VALID_PLUGIN_KINDS, document
the new kind in the PluginManifest docstring, extend the bundled auto-
load rule from 'backend only' to 'backend or platform'.
* plugins/platforms/irc/plugin.yaml: declare kind: platform.
* hermes_cli/gateway.py: remove the now-redundant
_load_bundled_platform_plugins_for_enumeration() helper and the
_enable_plugin_for_platform() helper. The setup menu's _all_platforms()
just calls discover_plugins() and reads the registry — bundled
platforms are already loaded at that point. Drops the 'needs_enable'
flag and the 'plugin disabled — select to enable' status string.
* hermes_cli/setup.py: relax the "gateway is configured" detector used
during OpenClaw migration. Switching to _platform_status() in an
earlier commit tightened the check to require an exact "configured"
match, dropping platforms whose status is "enabled, not paired",
"partially configured", "configured + E2EE", etc. Now any non-"not
configured" status counts — the user has already started setup there
and we shouldn't force the section to rerun.
* tests/hermes_cli/test_setup_irc.py: drop the TestIRCPluginDisabledFlow
class and test_configure_platform_enables_disabled_plugin_first — the
no-longer-existent flow they were testing.
* tests/hermes_cli/test_setup_openclaw_migration.py: patch both
setup.get_env_value and gateway.get_env_value in the 4 gateway-section
tests that reach _platform_status() through the unified setup flow;
switch WHATSAPP_ENABLED to the literal "true" in the registry-parity
test so WhatsApp's value-shape validator matches.
Verified via fresh-install smoke (empty plugins.enabled, no env vars):
IRC plugin loads, Platform('irc') resolves, _all_platforms() lists IRC
with status 'not configured'. 160 targeted tests pass.
feat(gateway): refine Platform._missing_ and platform-connected dispatch
Restricts plugin-name acceptance to bundled plugin scan + registry
(no arbitrary string -> enum-pollution), pulls per-platform connectivity
checks into a _PLATFORM_CONNECTED_CHECKERS lambda map with a clean
_is_platform_connected method, and adds tests covering the checker map,
plugin platform interface, and IRC setup wizard.
Merge the two gateway setup paths (hermes setup gateway + hermes gateway
setup) to use a single _unified_platforms() list that merges built-in
_PLATFORMS with dynamically registered plugin entries from
platform_registry.
- Add setup_fn field to PlatformEntry for plugin setup flows
- _unified_platforms() merges built-ins with registry entries by key
- setup_gateway() now uses unified list instead of hardcoded
_GATEWAY_PLATFORMS tuple list
- gateway_setup() uses same unified list, plugin entries appear
alongside built-ins with no [plugin] suffix
- _platform_status() handles plugin platforms via registry check_fn
- Plugin platforms with setup_fn get called directly; plugins without
get a generic env-var display fallback
IRC and other plugin platforms now appear automatically in the setup
menu when registered via platform_registry.register().
feat(gateway): surface disabled platform plugins in setup and auto-enable on select
Platform plugins under plugins/platforms/* (IRC, etc.) were gated behind
plugins.enabled, so `hermes gateway setup` wouldn't list them until the
user ran `hermes plugins enable <name>` first. Now the setup menu always
surfaces them as "plugin disabled — select to enable", and picking one
adds it to plugins.enabled before running its setup flow.
Along the way, unify the two gateway setup flows so `hermes setup gateway`
and `hermes gateway setup` both read from the same platform list (built-in
_PLATFORMS + platform_registry entries), dispatch through a single
_configure_platform() helper, and share _platform_status(). Deletes the
dead bespoke wrappers in setup.py (_setup_whatsapp, _setup_weixin,
_setup_email, etc.) that duplicated logic now covered by the registry
path or _setup_standard_platform.
Also:
- PlatformEntry gains a plugin_name field so the registry knows which
plugin owns each entry (required for auto-enable).
- PluginContext.register_platform auto-stamps plugin_name from the
manifest so plugins don't have to pass it explicitly.
- PluginManager now scans plugins/platforms/* as its own category root,
one level below the bundled plugin scan.
- Fix IRC plugin discovery: rename PLUGIN.yaml → plugin.yaml (the
scanner is case-sensitive) and add the missing __init__.py that
_load_directory_module requires.
Extract all os.execvp('hermes', ...) calls into a utility so flags like
--tui, --dev, --profile, --model, --provider, et al. survive session
resume and post-setup relaunch.
- resolve_hermes_bin: prefers sys.argv[0] when callable, then PATH,
then falls back to '${sys.executable} -m hermes_cli.main' (fixes nix
run relaunches)
- build_relaunch_argv: allowlists critical flags so they carry over
- cmd_sessions browse now calls relaunch(['--resume', <id>])
- _apply_profile_override skips redundant work when HERMES_HOME is
already set (child inherits parent profile)
- setup.py replaces _resolve_hermes_chat_argv with relaunch_chat()
- added comprehensive tests for flag extraction and binary resolution
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds Vercel Sandbox as a supported Hermes terminal backend alongside
existing providers (Local, Docker, Modal, SSH, Daytona, Singularity).
Uses the Vercel Python SDK to create/manage cloud microVMs, supports
snapshot-based filesystem persistence keyed by task_id, and integrates
with the existing BaseEnvironment shell contract and FileSyncManager
for credential/skill syncing.
Based on #17127 by @scotttrinh, cherry-picked onto current main.
Completes the cfg_get migration started in PR #17304. Covers the
remaining hermes_cli/ and plugins/ config-access sites that the first
PR intentionally left opportunistic.
Migrated (33 sites across 14 files):
hermes_cli/setup.py 13 sites (terminal.*, agent.*, display.*, compression.*, tts.*)
hermes_cli/tools_config.py 7 sites (tts.*, browser.*, web.*, platform_toolsets.*)
hermes_cli/plugins_cmd.py 3 sites (plugins.*, memory.*, context.*)
plugins/memory/honcho/cli.py 3 sites (hosts.*)
hermes_cli/web_server.py 1 site (dashboard.*)
hermes_cli/skills_config.py 1 site (platform_disabled)
hermes_cli/plugins.py 1 site (plugins.disabled)
hermes_cli/status.py 1 site (terminal.backend)
hermes_cli/mcp_config.py 1 site (mcp_servers.*)
hermes_cli/webhook.py 1 site (platforms.webhook)
plugins/memory/__init__.py 1 site (memory.provider)
plugins/memory/hindsight/ 1 site (banks.hermes)
plugins/memory/holographic/ 1 site (plugins.hermes-memory-store)
run_agent.py 1 site (auxiliary.compression)
The helper supports non-literal keys too, so e.g.
cfg.get('hosts', {}).get(HOST, {})
becomes
cfg_get(cfg, 'hosts', HOST, default={})
Migration bugs caught and fixed during this PR:
1. An AST-based batch rewrite naïvely captured the first word token in
a chain, which corrupted 'self._config.get(...).get(...)' into
'self.cfg_get(_config, ...)' (dropping 'self.', creating a broken
method call). Plugins/memory/hindsight caught it via its test suite.
Fixed manually to 'cfg_get(self._config, ...)'.
2. Import-extension heuristic rewrote multi-line parenthesized imports
('from X import (\n A,\n B,\n)') as
'from X import cfg_get, (' — syntactically broken. Fixed by inserting
cfg_get as the first name inside the parentheses.
Combined with PR #17304, the cfg_get migration now covers:
PR #17304 (first batch): 20 sites in tools/ + gateway/
PR #17317 (this one): 33 sites in hermes_cli/ + plugins/ + run_agent.py
Total: 53 sites migrated. Remaining ~8 sites are either:
- Function-call chains (e.g. '_load_stt_config().get(...).get(...)')
that would need double-evaluation or a local binding to migrate
cleanly — intentionally deferred.
- JSON response-navigation (e.g. 'response_data.get('data',{}).get('web'))
which is unrelated to config access and shouldn't use cfg_get.
Verified:
- 412/412 tests/plugins/ pass (including the hindsight test that caught
the self.X regex bug before commit)
- 3181/3189 tests/hermes_cli/ pass (8 pre-existing failures on main,
verified by git-stash comparison)
- Live 'hermes status' and 'hermes config' render correctly (exercise
the migrated terminal.backend, tts.provider, browser.cloud_provider,
compression.threshold, display.tool_progress sites)
- Live 'hermes chat': 1 turn + /quit, zero errors in 11-line log window
No semantic changes — cfg_get was already proven to be a 1:1 match for
the original .get("X",{}).get("Y",default) pattern in PR #17304.
Mechanical cleanup across 43 files — removes 46 unused imports
(F401) and 14 unused local variables (F841) detected by
`ruff check --select F401,F841`. Net: -49 lines.
Also fixes a latent NameError in rl_cli.py where `get_hermes_home()`
was called at module line 32 before its import at line 65 — the
module never imported successfully on main. The ruff audit surfaced
this because it correctly saw the symbol as imported-but-unused
(the call happened before the import ran); the fix moves the import
to the top of the file alongside other stdlib imports.
One `# noqa: F401` kept in hermes_cli/status.py for `subprocess`:
tests monkeypatch `hermes_cli.status.subprocess` as a regression
guard that systemctl isn't called on Termux, so the name must
exist at module scope even though the module body doesn't reference
it. Docstring explains the reason.
Also fixes an invalid `# noqa:` directive in
gateway/platforms/discord.py:308 that lacked a rule code.
Co-authored-by: teknium1 <teknium@users.noreply.github.com>
Every command in COMMAND_REGISTRY (/btw, /stop, /model, /help, /new,
/bg, /reset, ...) is now a first-class Slack slash command instead of
a /hermes <subcommand>. Users get the same autocomplete-driven slash
picker experience Slack users expect and that Discord and Telegram
already provide.
Previously Slack registered ONE native slash (/hermes) and split on
the first word, so typing /btw in Slack's composer got 'couldn't find
an app for /btw' because the workspace manifest never declared it.
Changes
- hermes_cli/commands.py: slack_native_slashes() + slack_app_manifest()
generate a Slack manifest from the registry (canonical names +
aliases + plugin commands), clamped to Slack's 50-slash cap with
/hermes reserved as the catch-all.
- gateway/platforms/slack.py: single regex matcher dispatches every
registered slash to _handle_slash_command, which dispatches on
command['command']. Legacy /hermes <subcommand> keeps working for
backward compat with older workspace manifests.
- hermes_cli/slack_cli.py + hermes_cli/main.py: new 'hermes slack
manifest' command prints/writes a full manifest (display info,
OAuth scopes, event subs, socket mode, slash commands) ready to
paste into 'Create from manifest' or Features → App Manifest.
- hermes_cli/setup.py: _setup_slack() now writes the manifest up-front
and points users at the 'From an app manifest' flow; also offers
to refresh the manifest on reconfigure for picking up new commands.
- Tests: 14 new tests covering native-slash dispatch (/btw, /stop,
/model), legacy /hermes <sub> compat, manifest structure, and
telegram<->slack parity (every Telegram command must also register
as a Slack slash). Existing /hermes-registration test updated to
assert the new regex matches /hermes, /btw, /stop, /model, /help.
- Docs: slack.md gains a 'Slash Commands' section + Option A manifest
flow in Step 1; cli-commands.md documents 'hermes slack manifest'.
Users pick up the new slashes by running 'hermes slack manifest --write'
and pasting into Features → App Manifest → Edit in their Slack app
config, then Save (Slack prompts for reinstall if scopes changed).
Bare `hermes setup` on a returning user now drops straight into the
full reconfigure wizard — every prompt shows the current value as its
default, press Enter to keep or type a new value to change it. The
returning-user menu is gone.
Behavior:
- First-time user: first-time wizard (unchanged)
- Returning user, bare command: full reconfigure wizard (new default)
- Returning user, `--quick`: only prompt for missing/unset items
- Returning user, one section: `hermes setup model|terminal|gateway|tools|agent`
- `--reconfigure`: preserved as backwards-compat alias (no-op since it's now default)
The section functions already used current values as prompt defaults —
this change just removes the extra click to get to them.
The 'Quick Setup - configure missing items only' menu option is now
exposed as the explicit `--quick` flag; it's the narrow case of
filling in missing config (e.g. after a partial OpenClaw migration or
when a required API key got cleared).
Inspired by Mercury Agent's `mercury doctor` UX.
Also removes:
- RETURNING_USER_MENU_SECTION_KEYS (orphaned constant)
- Two returning-user menu tests in test_setup_noninteractive.py
(guarding behavior that no longer exists — covered by
test_setup_reconfigure.py instead)
Three quality improvements on top of #15121 / #15130 / #15135:
1. Tool consolidation (9 → 7)
- spotify_saved_tracks + spotify_saved_albums → spotify_library with
kind='tracks'|'albums'. Handler code was ~90 percent identical
across the two old tools; the merge is a behavioral no-op.
- spotify_activity dropped. Its 'now_playing' action was a duplicate
of spotify_playback.get_currently_playing (both return identical
204/empty payloads). Its 'recently_played' action moves onto
spotify_playback as a new action — history belongs adjacent to
live state.
- Net: each API call ships 2 fewer tool schemas when the Spotify
toolset is enabled, and the action surface is more discoverable
(everything playback-related is on one tool).
2. Spotify skill (skills/media/spotify/SKILL.md)
Teaches the agent canonical usage patterns so common requests don't
balloon into 4+ tool calls:
- 'play X' = one search, then play by URI (not search + scan +
describe + play)
- 'what's playing' = single get_currently_playing (no preflight
get_state chain)
- Don't retry on '403 Premium required' or '403 No active device' —
both require user action
- URI/URL/bare-ID format normalization
- Full failure-mode reference for 204/401/403/429
3. Surfaced in 'hermes setup' tool status
Adds 'Spotify (PKCE OAuth)' to the tool status list when
auth.json has a Spotify access/refresh token. Matches the
homeassistant pattern but reads from auth.json (OAuth-based) rather
than env vars.
Docs updated to reflect the new 7-tool surface, and mention the
companion skill in the 'Using it' section.
Tests: 54 passing (client 22, auth 15, tools_config 35 — 18 = 54 after
renaming/replacing the spotify_activity tests with library +
recently_played coverage). Docusaurus build clean.
## Merged
Adds MiMo v2.5-pro and v2.5 support to Xiaomi native provider, OpenCode Go, and setup wizard.
### Changes
- Context lengths: added v2.5-pro (1M) and v2.5 (1M), corrected existing MiMo entries to exact values (262144)
- Provider lists: xiaomi, opencode-go, setup wizard
- Vision: upgraded from mimo-v2-omni to mimo-v2.5 (omnimodal)
- Config description updated for XIAOMI_API_KEY
- Tests updated for new vision model preference
### Verification
- 4322 tests passed, 0 new regressions
- Live API tested on Xiaomi portal: basic, reasoning, tool calling, multi-tool, file ops, system prompt, vision — all pass
- Self-review found and fixed 2 issues (redundant vision check, stale HuggingFace context length)
On fresh RHEL/Debian SSH sessions without linger, `systemctl --user
start hermes-gateway` fails with 'Failed to connect to bus: No medium
found' because /run/user/$UID/bus doesn't exist. Setup previously
showed a raw CalledProcessError and continued claiming success, so the
gateway never actually started.
systemd_start() and systemd_restart() now call _preflight_user_systemd()
for the user scope first:
- Bus socket already there → no-op (desktop / linger-enabled servers)
- Linger off → try loginctl enable-linger (works when polkit permits,
needs sudo otherwise), wait for socket
- Still unreachable → raise UserSystemdUnavailableError with a clean
remediation message pointing to sudo loginctl + hermes gateway run
as the foreground fallback
Setup's start/restart handlers and gateway_command() catch the new
exception and render the multi-line guidance instead of a traceback.
Adds a first-class 'stepfun' API-key provider surfaced as Step Plan:
- Support Step Plan setup for both International and China regions
- Discover Step Plan models live from /step_plan/v1/models, with a
small coding-focused fallback catalog when discovery is unavailable
- Thread StepFun through provider metadata, setup persistence, status
and doctor output, auxiliary routing, and model normalization
- Add tests for provider resolution, model validation, metadata
mapping, and StepFun region/model persistence
Based on #6005 by @hengm3467.
Co-authored-by: hengm3467 <100685635+hengm3467@users.noreply.github.com>
* feat(plugins): pluggable image_gen backends + OpenAI provider
Adds a ImageGenProvider ABC so image generation backends register as
bundled plugins under `plugins/image_gen/<name>/`. The plugin scanner
gains three primitives to make this work generically:
- `kind:` manifest field (`standalone` | `backend` | `exclusive`).
Bundled `kind: backend` plugins auto-load — no `plugins.enabled`
incantation. User-installed backends stay opt-in.
- Path-derived keys: `plugins/image_gen/openai/` gets key
`image_gen/openai`, so a future `tts/openai` cannot collide.
- Depth-2 recursion into category namespaces (parent dirs without a
`plugin.yaml` of their own).
Includes `OpenAIImageGenProvider` as the first consumer (gpt-image-1.5
default, plus gpt-image-1, gpt-image-1-mini, DALL-E 3/2). Base64
responses save to `$HERMES_HOME/cache/images/`; URL responses pass
through.
FAL stays in-tree for this PR — a follow-up ports it into
`plugins/image_gen/fal/` so the in-tree `image_generation_tool.py`
slims down. The dispatch shim in `_handle_image_generate` only fires
when `image_gen.provider` is explicitly set to a non-FAL value, so
existing FAL setups are untouched.
- 41 unit tests (scanner recursion, kind parsing, gate logic,
registry, OpenAI payload shapes)
- E2E smoke verified: bundled plugin autoloads, registers, and
`_handle_image_generate` routes to OpenAI when configured
* fix(image_gen/openai): don't send response_format to gpt-image-*
The live API rejects it: 'Unknown parameter: response_format'
(verified 2026-04-21 with gpt-image-1.5). gpt-image-* models return
b64_json unconditionally, so the parameter was both unnecessary and
actively broken.
* feat(image_gen/openai): gpt-image-2 only, drop legacy catalog
gpt-image-2 is the latest/best OpenAI image model (released 2026-04-21)
and there's no reason to expose the older gpt-image-1.5 / gpt-image-1 /
dall-e-3 / dall-e-2 alongside it — slower, lower quality, or awkward
(dall-e-2 squares only). Trim the catalog down to a single model.
Live-verified end-to-end: landscape 1536x1024 render of a Moog-style
synth matches prompt exactly, 2.4MB PNG saved to cache.
* feat(image_gen/openai): expose gpt-image-2 as three quality tiers
Users pick speed/fidelity via the normal model picker instead of a
hidden quality knob. All three tier IDs resolve to the single underlying
gpt-image-2 API model with a different quality parameter:
gpt-image-2-low ~15s fast iteration
gpt-image-2-medium ~40s default
gpt-image-2-high ~2min highest fidelity
Live-measured on OpenAI's API today: 15.4s / 40.8s / 116.9s for the
same 1024x1024 prompt.
Config:
image_gen.openai.model: gpt-image-2-high
# or
image_gen.model: gpt-image-2-low
# or env var for scripts/tests
OPENAI_IMAGE_MODEL=gpt-image-2-medium
Live-verified end-to-end with the low tier: 18.8s landscape render of a
golden retriever in wildflowers, vision-confirmed exact match.
* feat(tools_config): plugin image_gen providers inject themselves into picker
'hermes tools' → Image Generation now shows plugin-registered backends
alongside Nous Subscription and FAL.ai without tools_config.py needing
to know about them. OpenAI appears as a third option today; future
backends appear automatically as they're added.
Mechanism:
- ImageGenProvider gains an optional get_setup_schema() hook
(name, badge, tag, env_vars). Default derived from display_name.
- tools_config._plugin_image_gen_providers() pulls the schemas from
every registered non-FAL plugin provider.
- _visible_providers() appends those rows when rendering the Image
Generation category.
- _configure_provider() handles the new image_gen_plugin_name marker:
writes image_gen.provider and routes to the plugin's list_models()
catalog for the model picker.
- _toolset_needs_configuration_prompt('image_gen') stops demanding a
FAL key when any plugin provider reports is_available().
FAL is skipped in the plugin path because it already has hardcoded
TOOL_CATEGORIES rows — when it gets ported to a plugin in a follow-up
PR the hardcoded rows go away and it surfaces through the same path
as OpenAI.
Verified live: picker shows Nous Subscription / FAL.ai / OpenAI.
Picking OpenAI prompts for OPENAI_API_KEY, then shows the
gpt-image-2-low/medium/high model picker sourced from the plugin.
397 tests pass across plugins/, tools_config, registry, and picker.
* fix(image_gen): close final gaps for plugin-backend parity with FAL
Two small places that still hardcoded FAL:
- hermes_cli/setup.py status line: an OpenAI-only setup showed
'Image Generation: missing FAL_KEY'. Now probes plugin providers
and reports '(OpenAI)' when one is_available() — or falls back to
'missing FAL_KEY or OPENAI_API_KEY' if nothing is configured.
- image_generate tool schema description: said 'using FAL.ai, default
FLUX 2 Klein 9B'. Rewrote provider-neutral — 'backend and model are
user-configured' — and notes the 'image' field can be a URL or an
absolute path, which the gateway delivers either way via
extract_local_files().
OpenCode Go's published model list (opencode.ai/docs/go) includes kimi-k2.6,
qwen3.5-plus, and qwen3.6-plus, but Hermes' curated lists didn't carry them.
When the live /models probe fails during `hermes model`, users fell back to
the stale curated list and had to type newer models via 'Enter custom model
name'.
Adds kimi-k2.6 (now first in the Go list), qwen3.6-plus, and qwen3.5-plus
to both the model picker (hermes_cli/models.py) and setup defaults
(hermes_cli/setup.py). All routed through the existing opencode-go
chat_completions path — no api_mode changes needed.
Builds on @AxDSan's PR #2109 to finish the KittenTTS wiring so the
provider behaves like every other TTS backend end to end.
- tools/tts_tool.py: `_check_kittentts_available()` helper and wire
into `check_tts_requirements()`; extend Opus-conversion list to
include kittentts (WAV → Opus for Telegram voice bubbles); point the
missing-package error at `hermes setup tts`.
- hermes_cli/tools_config.py: add KittenTTS entry to the "Text-to-Speech"
toolset picker, with a `kittentts` post_setup hook that auto-installs
the wheel + soundfile via pip.
- hermes_cli/setup.py: `_install_kittentts_deps()`, new choice + install
flow in `_setup_tts_provider()`, provider_labels entry, and status row
in the `hermes setup` summary.
- website/docs/user-guide/features/tts.md: add KittenTTS to the provider
table, config example, ffmpeg note, and the zero-config voice-bubble tip.
- tests/tools/test_tts_kittentts.py: 10 unit tests covering generation,
model caching, config passthrough, ffmpeg conversion, availability
detection, and the missing-package dispatcher branch.
E2E verified against the real `kittentts` wheel:
- WAV direct output (pcm_s16le, 24kHz mono)
- MP3 conversion via ffmpeg (from WAV)
- Telegram flow (provider in Opus-conversion list) produces
`codec_name=opus`, 48kHz mono, `voice_compatible=True`, and the
`[[audio_as_voice]]` marker
- check_tts_requirements() returns True when kittentts is installed
Full AST-based scan of all .py files to find every case where a module
or name is imported locally inside a function body but is already
available at module level. This is the second pass — the first commit
handled the known cases from the lint report; this one catches
everything else.
Files changed (19):
cli.py — 16 removals: time as _time/_t/_tmod (×10),
re / re as _re (×2), os as _os, sys,
partial os from combo import,
from model_tools import get_tool_definitions
gateway/run.py — 8 removals: MessageEvent as _ME /
MessageType as _MT (×3), os as _os2,
MessageEvent+MessageType (×2), Platform,
BasePlatformAdapter as _BaseAdapter
run_agent.py — 6 removals: get_hermes_home as _ghh,
partial (contextlib, os as _os),
cleanup_vm, cleanup_browser,
set_interrupt as _sif (×2),
partial get_toolset_for_tool
hermes_cli/main.py — 4 removals: get_hermes_home, time as _time,
logging as _log, shutil
hermes_cli/config.py — 1 removal: get_hermes_home as _ghome
hermes_cli/runtime_provider.py
— 1 removal: load_config as _load_bedrock_config
hermes_cli/setup.py — 2 removals: importlib.util (×2)
hermes_cli/nous_subscription.py
— 1 removal: from hermes_cli.config import load_config
hermes_cli/tools_config.py
— 1 removal: from hermes_cli.config import load_config, save_config
cron/scheduler.py — 3 removals: concurrent.futures, json as _json,
from hermes_cli.config import load_config
batch_runner.py — 1 removal: list_distributions as get_all_dists
(kept print_distribution_info, not at top level)
tools/send_message_tool.py
— 2 removals: import os (×2)
tools/skills_tool.py — 1 removal: logging as _logging
tools/browser_camofox.py
— 1 removal: from hermes_cli.config import load_config
tools/image_generation_tool.py
— 1 removal: import fal_client
environments/tool_context.py
— 1 removal: concurrent.futures
gateway/platforms/bluebubbles.py
— 1 removal: httpx as _httpx
gateway/platforms/whatsapp.py
— 1 removal: import asyncio
tui_gateway/server.py — 2 removals: from datetime import datetime,
import time
All alias references (_time, _t, _tmod, _re, _os, _os2, _json, _ghh,
_ghome, _sif, _ME, _MT, _BaseAdapter, _load_bedrock_config, _httpx,
_logging, _log, get_all_dists) updated to use the top-level names.
Sweep ~74 redundant local imports across 21 files where the same module
was already imported at the top level. Also includes type fixes and lint
cleanups on the same branch.
Aslaaen's fix in the original PR covered _detect_api_mode_for_url and the
two openai/xai sites in run_agent.py. This finishes the sweep: the same
substring-match false-positive class (e.g. https://api.openai.com.evil/v1,
https://proxy/api.openai.com/v1, https://api.anthropic.com.example/v1)
existed in eight more call sites, and the hostname helper was duplicated
in two modules.
- utils: add shared base_url_hostname() (single source of truth).
- hermes_cli/runtime_provider, run_agent: drop local duplicates, import
from utils. Reuse the cached AIAgent._base_url_hostname attribute
everywhere it's already populated.
- agent/auxiliary_client: switch codex-wrap auto-detect, max_completion_tokens
gate (auxiliary_max_tokens_param), and custom-endpoint max_tokens kwarg
selection to hostname equality.
- run_agent: native-anthropic check in the Claude-style model branch
and in the AIAgent init provider-auto-detect branch.
- agent/model_metadata: Anthropic /v1/models context-length lookup.
- hermes_cli/providers.determine_api_mode: anthropic / openai URL
heuristics for custom/unknown providers (the /anthropic path-suffix
convention for third-party gateways is preserved).
- tools/delegate_tool: anthropic detection for delegated subagent
runtimes.
- hermes_cli/setup, hermes_cli/tools_config: setup-wizard vision-endpoint
native-OpenAI detection (paired with deduping the repeated check into
a single is_native_openai boolean per branch).
Tests:
- tests/test_base_url_hostname.py covers the helper directly
(path-containing-host, host-suffix, trailing dot, port, case).
- tests/hermes_cli/test_determine_api_mode_hostname.py adds the same
regression class for determine_api_mode, plus a test that the
/anthropic third-party gateway convention still wins.
Also: add asslaenn5@gmail.com → Aslaaen to scripts/release.py AUTHOR_MAP.
Add kimi-k2.6 as the top model in kimi-coding, kimi-coding-cn, and
moonshot static provider lists (models.py, setup.py, main.py).
kimi-k2.5 retained alongside it.
The google-gemini-cli (Cloud Code Assist) and gemini (native API) model
pickers only offered gemini-2.5-*, so users picking Gemini 3 had to type
a custom model name — usually wrong (e.g. "gemini-3.1-pro"), producing
a 404 from cloudcode-pa.googleapis.com.
Replace the 2.5-* entries with the actual Code Assist / Gemini API
preview IDs: gemini-3.1-pro-preview, gemini-3-pro-preview,
gemini-3-flash-preview (and gemini-3.1-flash-lite-preview on native).
Update the hardcoded fallback in hermes_cli/main.py to match.
Copilot's menu retains gemini-2.5-pro — that catalog is Microsoft's.
* fix(gateway): detect legacy hermes.service units from pre-rename installs
Older Hermes installs used a different service name (hermes.service) before
the rename to hermes-gateway.service. When both units remain installed, they
fight over the same bot token — after PR #5646's signal-recovery change,
this manifests as a 30-second SIGTERM flap loop between the two services.
Detection is an explicit allowlist (no globbing) plus an ExecStart content
check, so profile units (hermes-gateway-<profile>.service) and unrelated
third-party services named 'hermes' are never matched.
Wired into systemd_install, systemd_status, gateway_setup wizard, and the
main hermes setup flow — anywhere we already warn about scope conflicts now
also warns about legacy units.
* feat(gateway): add migrate-legacy command + install-time removal prompt
- New hermes_cli.gateway.remove_legacy_hermes_units() removes legacy
unit files with stop → disable → unlink → daemon-reload. Handles user
and system scopes separately; system scope returns path list when not
running as root so the caller can tell the user to re-run with sudo.
- New 'hermes gateway migrate-legacy' subcommand (with --dry-run and -y)
routes to remove_legacy_hermes_units via gateway_command dispatch.
- systemd_install now offers to remove legacy units BEFORE installing
the new hermes-gateway.service, preventing the SIGTERM flap loop that
hits users who still have pre-rename hermes.service around.
Profile units (hermes-gateway-<profile>.service) remain untouched in
all paths — the legacy allowlist is explicit (_LEGACY_SERVICE_NAMES)
and the ExecStart content check further narrows matches.
* fix(gateway): mark --replace SIGTERM as planned so target exits 0
PR #5646 made SIGTERM exit the gateway with code 1 so systemd's
Restart=on-failure revives it after unexpected kills. But when a user has
two gateway units fighting for the same bot token (e.g. legacy
hermes.service + hermes-gateway.service from a pre-rename install), the
--replace takeover itself becomes the 'unexpected' SIGTERM — the loser
exits 1, systemd revives it 30s later, and the cycle flaps indefinitely.
Before calling terminate_pid(), --replace now writes a short-lived marker
file naming the target PID + start_time. The target's shutdown_signal_handler
consumes the marker and, when it names this process, leaves
_signal_initiated_shutdown=False so the final exit code stays 0.
Staleness defences:
- PID + start_time combo prevents PID reuse matching an old marker
- Marker older than 60s is treated as stale and discarded
- Marker is unlinked on first read even if it doesn't match this process
- Replacer clears the marker post-loop + on permission-denied give-up
Google-side 429 Code Assist errors now flow through Hermes' normal rate-limit
path (status_code on the exception, Retry-After preserved via error.response)
instead of being opaque RuntimeErrors. User sees a one-line capacity message
instead of a 500-char JSON dump.
Changes
- CodeAssistError grows status_code / response / retry_after / details attrs.
_extract_status_code in error_classifier picks up status_code and classifies
429 as FailoverReason.rate_limit, so fallback_providers triggers the same
way it does for SDK errors. run_agent.py line ~10428 already walks
error.response.headers for Retry-After — preserving the response means that
path just works.
- _gemini_http_error parses the Google error envelope (error.status +
error.details[].reason from google.rpc.ErrorInfo, retryDelay from
google.rpc.RetryInfo). MODEL_CAPACITY_EXHAUSTED / RESOURCE_EXHAUSTED / 404
model-not-found each produce a human-readable message; unknown shapes fall
back to the previous raw-body format.
- Drop gemma-4-26b-it from hermes_cli/models.py, hermes_cli/setup.py, and
agent/model_metadata.py — Google returned 404 for it today in local repro.
Kept gemma-4-31b-it (capacity-constrained but not retired).
Validation
| | Before | After |
|---------------------------|--------------------------------|-------------------------------------------|
| Error message | 'Code Assist returned HTTP 429: {500 chars JSON}' | 'Gemini capacity exhausted for gemini-2.5-pro (Google-side throttle...)' |
| status_code on error | None (opaque RuntimeError) | 429 |
| Classifier reason | unknown (string-match fallback) | FailoverReason.rate_limit |
| Retry-After honored | ignored | extracted from RetryInfo or header |
| gemma-4-26b-it picker | advertised (404s on Google) | removed |
Unit + E2E tests cover non-streaming 429, streaming 429, 404 model-not-found,
Retry-After header fallback, malformed body, and classifier integration.
Targeted suites: tests/agent/test_gemini_cloudcode.py (81 tests), full
tests/hermes_cli (2203 tests) green.
Co-authored-by: teknium1 <teknium@nousresearch.com>
Follow-up to WideLee's salvaged PR #11582.
Back-compat for QQ_HOME_CHANNEL → QQBOT_HOME_CHANNEL rename:
- gateway/config.py reads QQBOT_HOME_CHANNEL, falls back to QQ_HOME_CHANNEL
with a one-shot deprecation warning so users on the old name aren't
silently broken.
- cron/scheduler.py: _HOME_TARGET_ENV_VARS['qqbot'] now maps to the new
name; _get_home_target_chat_id falls back to the legacy name via a
_LEGACY_HOME_TARGET_ENV_VARS table.
- hermes_cli/status.py + hermes_cli/setup.py: honor both names when
displaying or checking for missing home channels.
- hermes_cli/config.py: keep legacy QQ_HOME_CHANNEL[_NAME] in
_EXTRA_ENV_KEYS so .env sanitization still recognizes them.
Scope cleanup:
- Drop qrcode from core dependencies and requirements.txt (remains in
messaging/dingtalk/feishu extras). _qqbot_render_qr already degrades
gracefully when qrcode is missing, printing a 'pip install qrcode' tip
and falling back to URL-only display.
- Restore @staticmethod on QQAdapter._detect_message_type (it doesn't
use self). Revert the test change that was only needed when it was
converted to an instance method.
- Reset uv.lock to origin/main; the PR's stale lock also included
unrelated changes (atroposlib source URL, hermes-agent version bump,
fastapi additions) that don't belong.
Verified E2E:
- Existing user (QQ_HOME_CHANNEL set): gateway + cron both pick up the
legacy name; deprecation warning logs once.
- Fresh user (QQBOT_HOME_CHANNEL set): gateway + cron use new name,
no warning.
- Both set: new name wins on both surfaces.
Targeted tests: 296 passed, 4 skipped (qqbot + cron + hermes_cli).
Adds Google Gemini TTS as the seventh voice provider, with 30 prebuilt
voices (Zephyr, Puck, Kore, Enceladus, Gacrux, etc.) and natural-language
prompt control. Integrates through the existing provider chain:
- tools/tts_tool.py: new _generate_gemini_tts() calls the
generativelanguage REST endpoint with responseModalities=[AUDIO],
wraps the returned 24kHz mono 16-bit PCM (L16) in a WAV RIFF header,
then ffmpeg-converts to MP3 or Opus depending on output extension.
For .ogg output, libopus is forced explicitly so Telegram voice
bubbles get Opus (ffmpeg defaults to Vorbis for .ogg).
- hermes_cli/tools_config.py: exposes 'Google Gemini TTS' as a provider
option in the curses-based 'hermes tools' UI.
- hermes_cli/setup.py: adds gemini to the setup wizard picker, tool
status display, and API key prompt branch (accepts existing
GEMINI_API_KEY or GOOGLE_API_KEY, falls back to Edge if neither set).
- tests/tools/test_tts_gemini.py: 15 unit tests covering WAV header
wrap correctness, env var fallback (GEMINI/GOOGLE), voice/model
overrides, snake_case vs camelCase inlineData handling, HTTP error
surfacing, and empty-audio edge cases.
- docs: TTS features page updated to list seven providers with the new
gemini config block and ffmpeg notes.
Live-tested against api key against gemini-2.5-flash-preview-tts: .wav,
.mp3, and Telegram-compatible .ogg (Opus codec) all produce valid
playable audio.
Replace the HERMES_ENABLE_NOUS_MANAGED_TOOLS env-var feature flag with
subscription-based detection. The Tool Gateway is now available to any
paid Nous subscriber without needing a hidden env var.
Core changes:
- managed_nous_tools_enabled() checks get_nous_auth_status() +
check_nous_free_tier() instead of an env var
- New use_gateway config flag per tool section (web, tts, browser,
image_gen) records explicit user opt-in and overrides direct API
keys at runtime
- New prefers_gateway(section) shared helper in tool_backend_helpers.py
used by all 4 tool runtimes (web, tts, image gen, browser)
UX flow:
- hermes model: after Nous login/model selection, shows a curses
prompt listing all gateway-eligible tools with current status.
User chooses to enable all, enable only unconfigured tools, or skip.
Defaults to Enable for new users, Skip when direct keys exist.
- hermes tools: provider selection now manages use_gateway flag —
selecting Nous Subscription sets it, selecting any other provider
clears it
- hermes status: renamed section to Nous Tool Gateway, added
free-tier upgrade nudge for logged-in free users
- curses_radiolist: new description parameter for multi-line context
that survives the screen clear
Runtime behavior:
- Each tool runtime (web_tools, tts_tool, image_generation_tool,
browser_use) checks prefers_gateway() before falling back to
direct env-var credentials
- get_nous_subscription_features() respects use_gateway flags,
suppressing direct credential detection when the user opted in
Removed:
- HERMES_ENABLE_NOUS_MANAGED_TOOLS env var and all references
- apply_nous_provider_defaults() silent TTS auto-set
- get_nous_subscription_explainer_lines() static text
- Override env var warnings (use_gateway handles this properly now)
The setup wizard accepted any string as a Telegram bot token without
validation. Invalid tokens were only caught at runtime when the gateway
failed to connect, with no clear error message.
Add regex validation for the expected format (<numeric_id>:<hash>) and
loop until a valid token is entered or the user cancels.
- Rename platform from 'qq' to 'qqbot' across all integration points
(Platform enum, toolset, config keys, import paths, file rename qq.py → qqbot.py)
- Add PLATFORM_HINTS for QQBot in prompt_builder (QQ supports markdown)
- Set SUPPORTS_MESSAGE_EDITING = False to skip streaming on QQ
(prevents duplicate messages from non-editable partial + final sends)
- Add _send_qqbot() standalone send function for cron/send_message tool
- Add interactive _setup_qq() wizard in hermes_cli/setup.py
- Restore missing _setup_signal/email/sms/dingtalk/feishu/wecom/wecom_callback
functions that were lost during the original merge
Adds Arcee AI as a standard direct provider (ARCEEAI_API_KEY) with
Trinity models: trinity-large-thinking, trinity-large-preview, trinity-mini.
Standard OpenAI-compatible provider checklist: auth.py, config.py,
models.py, main.py, providers.py, doctor.py, model_normalize.py,
model_metadata.py, setup.py, trajectory_compressor.py.
Based on PR #9274 by arthurbr11, simplified to a standard direct
provider without dual-endpoint OpenRouter routing.
OpenCode Zen was in _DOT_TO_HYPHEN_PROVIDERS, causing all dotted model
names (minimax-m2.5-free, gpt-5.4, glm-5.1) to be mangled. The fix:
Layer 1 (model_normalize.py): Remove opencode-zen from the blanket
dot-to-hyphen set. Add an explicit block that preserves dots for
non-Claude models while keeping Claude hyphenated (Zen's Claude
endpoint uses anthropic_messages mode which expects hyphens).
Layer 2 (run_agent.py _anthropic_preserve_dots): Add opencode-zen and
zai to the provider allowlist. Broaden URL check from opencode.ai/zen/go
to opencode.ai/zen/ to cover both Go and Zen endpoints. Add bigmodel.cn
for ZAI URL detection.
Also adds glm-5.1 to ZAI model lists in models.py and setup.py.
Closes#7710
Salvaged from contributions by:
- konsisumer (PR #7739, #7719)
- DomGrieco (PR #8708)
- Esashiero (PR #7296)
- sharziki (PR #7497)
- XiaoYingGee (PR #8750)
- APTX4869-maker (PR #8752)
- kagura-agent (PR #7157)
Centralize container detection in hermes_constants.is_container() with
process-lifetime caching, matching existing is_wsl()/is_termux() patterns.
Dedup _is_inside_container() in config.py to delegate to the new function.
Add _run_systemctl() wrapper that converts FileNotFoundError to RuntimeError
for defense-in-depth — all 10 bare subprocess.run(_systemctl_cmd(...)) call
sites now route through it.
Make supports_systemd_services() return False in containers and when
systemctl binary is absent (shutil.which check).
Add Docker-specific guidance in gateway_command() for install/uninstall/start
subcommands — exit 0 with helpful instructions instead of crashing.
Make 'hermes status' show 'Manager: docker (foreground)' and 'hermes dump'
show 'running (docker, pid N)' inside containers.
Fix setup_gateway() to use supports_systemd instead of _is_linux for all
systemd-related branches, and show Docker restart policy instructions in
containers.
Replace inline /.dockerenv check in voice_mode.py with is_container().
Fixes#7420
Co-authored-by: teknium1 <teknium1@users.noreply.github.com>
Add the missing 'Adding a Platform Adapter' developer guide — a
comprehensive step-by-step checklist covering all 20+ integration
points (enum, adapter, config, runner, CLI, tools, toolsets, cron,
webhooks, tests, and docs). Includes common patterns for long-poll,
callback/webhook, and token-lock adapters with reference implementations.
Also adds full docs coverage for the WeCom Callback platform:
- New docs page: user-guide/messaging/wecom-callback.md
- Environment variables reference (9 WECOM_CALLBACK_* vars)
- Toolsets reference (hermes-wecom-callback)
- Messaging index (comparison table, architecture diagram, toolsets,
security, next-steps links)
- Integrations index listing
- Sidebar entries for both new pages
Wire Signal, Email, SMS (Twilio), DingTalk, Feishu/Lark, and WeCom into
the hermes setup gateway interactive wizard. These platforms all had
working adapters and _PLATFORMS entries in gateway.py but were invisible
in the setup checklist — users had to manually edit .env to configure them.
Changes:
- gateway.py: Add _setup_email/sms/dingtalk/feishu/wecom functions
delegating to _setup_standard_platform (Signal already had a custom one)
- setup.py: Add wrapper functions for all 6 new platforms
- setup.py: Add all 6 to _GATEWAY_PLATFORMS checklist registry
- setup.py: Add missing env vars to any_messaging check
- setup.py: Add all missing platforms to _get_section_config_summary
(was also missing Matrix, Mattermost, Weixin, Webhooks)
- docs: Add FEISHU_ALLOWED_USERS and WECOM_ALLOWED_USERS examples
Incorporates and extends the work from PR #7918 by bugmaker2.
Aligns MiniMax provider with official API documentation. Fixes 6 bugs:
transport mismatch (openai_chat -> anthropic_messages), credential leak
in switch_model(), prompt caching sent to non-Anthropic endpoints,
dot-to-hyphen model name corruption, trajectory compressor URL routing,
and stale doctor health check.
Also corrects context window (204,800), thinking support (manual mode),
max output (131,072), and model catalog (M2 family only on /anthropic).
Source: https://platform.minimax.io/docs/api-reference/text-anthropic-api
Co-authored-by: kshitijk4poor <kshitijk4poor@users.noreply.github.com>
Translate all nio SDK calls to mautrix equivalents while preserving the
adapter structure, business logic, and all features (E2EE, reactions,
threading, mention gating, text batching, media caching, voice MSC3245).
Key changes:
- nio.AsyncClient -> mautrix.client.Client + HTTPAPI + MemoryStateStore
- Manual E2EE key management -> OlmMachine with auto key lifecycle
- isinstance(resp, nio.XxxResponse) -> mautrix returns values directly
- add_event_callback per type -> single ROOM_MESSAGE handler with
msgtype dispatch
- Room state (member_count, display_name) via async state store lookups
- Upload/download return ContentURI/bytes directly (no wrapper objects)
After curses.wrapper() or simple_term_menu exits, endwin() restores the
terminal but does NOT drain the OS input buffer. Leftover escape-sequence
bytes from arrow key navigation remain buffered and get silently consumed
by the next input()/getpass.getpass() call.
This caused a user-reported bug where selecting Z.AI/GLM as provider wrote
^[^[ (two ESC chars) into .env as the API key, because the buffered escape
bytes were consumed by getpass before the user could type anything.
Fix: add flush_stdin() helper using termios.tcflush(TCIFLUSH) and call it
after every curses.wrapper() and simple_term_menu .show() return across all
interactive menu sites:
- hermes_cli/curses_ui.py (curses_checklist)
- hermes_cli/setup.py (_curses_prompt_choice)
- hermes_cli/tools_config.py (_prompt_choice)
- hermes_cli/auth.py (_prompt_model_selection)
- hermes_cli/main.py (3 simple_term_menu usages)
Automated dead code audit using vulture + coverage.py + ast-grep intersection,
confirmed by Opus deep verification pass. Every symbol verified to have zero
production callers (test imports excluded from reachability analysis).
Removes ~1,534 lines of dead production code across 46 files and ~1,382 lines
of stale test code. 3 entire files deleted (agent/builtin_memory_provider.py,
hermes_cli/checklist.py, tests/hermes_cli/test_setup_model_selection.py).
Co-authored-by: alt-glitch <balyan.sid@gmail.com>
The setup wizard's OpenClaw migration previously ran immediately with
aggressive defaults (overwrite=True, preset=full) after a single
'Would you like to import?' prompt. This caused several problems:
- Config values with different semantics (e.g. tool_call_execution:
'auto' in OpenClaw vs 'off' for Hermes yolo mode) were imported
without translation
- Gateway tokens were hijacked from OpenClaw without warning, taking
over Telegram/Slack/Discord channels
- Instruction files (.md) containing OpenClaw-specific setup/restart
procedures were copied, causing Hermes restart failures
Now the migration:
1. Asks 'Would you like to see what can be imported?' (softer framing)
2. Runs a dry-run preview showing everything that would be imported
3. Displays categorized warnings for high-impact items (gateway
takeover, config value differences, instruction files)
4. Asks for explicit confirmation with default=No
5. Executes with overwrite=False (preserves existing Hermes config)
Also extracts _load_openclaw_migration_module() for reuse and adds
_print_migration_preview() with keyword-based warning detection.
Tests updated for two-phase behavior + new test for decline-after-preview.
The BlueBubbles adapter was merged but missing setup wizard support:
- Add _setup_bluebubbles() guided setup (server URL, password, allowlist,
home channel, webhook port)
- Add to _GATEWAY_PLATFORMS registry so it appears in 'hermes setup gateway'
- Add to any_messaging check and home channel missing warning
- Add to gateway status display in 'hermes setup'
- Add BLUEBUBBLES_SERVER_URL, BLUEBUBBLES_PASSWORD, BLUEBUBBLES_ALLOWED_USERS
to OPTIONAL_ENV_VARS with descriptions and categories
Previously the only way to configure BlueBubbles was manually editing .env.
* fix(cli): route error messages through ChatConsole inside patch_stdout
Cherry-pick of PR #5798 by @icn5381.
Replace self.console.print() with ChatConsole().print() for 11 error/status
messages reachable during the interactive session. Inside patch_stdout,
self.console (plain Rich Console) writes raw ANSI escapes that StdoutProxy
mangles into garbled text. ChatConsole uses prompt_toolkit's native
print_formatted_text which renders correctly.
Same class of bug as #2262 — that fix covered agent output but missed
these error paths in _ensure_runtime_credentials, _init_agent, quick
commands, skill loading, and plan mode.
* fix(model-picker): add scrolling viewport to curses provider menu
Cherry-pick of PR #5790 by @Lempkey. Fixes#5755.
_curses_prompt_choice rendered items starting unconditionally from index 0
with no scroll offset. The 'More providers' submenu has 13 entries. On
terminals shorter than ~16 rows, items past the fold were never drawn.
When UP-arrow wrapped cursor from 0 to the last item (Cancel, index 12),
the highlight rendered off-screen — appearing as if only Cancel existed.
Adds scroll_offset tracking that adjusts each frame to keep the cursor
inside the visible window.
* feat(cli): skin-aware compact banner + git state in startup banner
Combined salvage of PR #5922 by @ASRagab and PR #5877 by @xinbenlv.
Compact banner changes (from #5922):
- Read active skin colors and branding instead of hardcoding gold/NOUS HERMES
- Default skin preserves backward-compatible legacy branding
- Non-default skins use their own agent_name and colors
Git state in banner (from #5877):
- New format_banner_version_label() shows upstream/local git hashes
- Full banner title now includes git state (upstream hash, carried commits)
- Compact banner line2 shows the version label with git state
- Widen compact banner max width from 64 to 88 to fit version info
Both the full Rich banner and compact fallback are now skin-aware
and show git state.
Comprehensive cleanup across 80 files based on automated (ruff, pyflakes, vulture)
and manual analysis of the entire codebase.
Changes by category:
Unused imports removed (~95 across 55 files):
- Removed genuinely unused imports from all major subsystems
- agent/, hermes_cli/, tools/, gateway/, plugins/, cron/
- Includes imports in try/except blocks that were truly unused
(vs availability checks which were left alone)
Unused variables removed (~25):
- Removed dead variables: connected, inner, channels, last_exc,
source, new_server_names, verify, pconfig, default_terminal,
result, pending_handled, temperature, loop
- Dropped unused argparse subparser assignments in hermes_cli/main.py
(12 instances of add_parser() where result was never used)
Dead code removed:
- run_agent.py: Removed dead ternary (None if False else None) and
surrounding unreachable branch in identity fallback
- run_agent.py: Removed write-only attribute _last_reported_tool
- hermes_cli/providers.py: Removed dead @property decorator on
module-level function (decorator has no effect outside a class)
- gateway/run.py: Removed unused MCP config load before reconnect
- gateway/platforms/slack.py: Removed dead SessionSource construction
Undefined name bugs fixed (would cause NameError at runtime):
- batch_runner.py: Added missing logger = logging.getLogger(__name__)
- tools/environments/daytona.py: Added missing Dict and Path imports
Unnecessary global statements removed (14):
- tools/terminal_tool.py: 5 functions declared global for dicts
they only mutated via .pop()/[key]=value (no rebinding)
- tools/browser_tool.py: cleanup thread loop only reads flag
- tools/rl_training_tool.py: 4 functions only do dict mutations
- tools/mcp_oauth.py: only reads the global
- hermes_time.py: only reads cached values
Inefficient patterns fixed:
- startswith/endswith tuple form: 15 instances of
x.startswith('a') or x.startswith('b') consolidated to
x.startswith(('a', 'b'))
- len(x)==0 / len(x)>0: 13 instances replaced with pythonic
truthiness checks (not x / bool(x))
- in dict.keys(): 5 instances simplified to in dict
- Redefined unused name: removed duplicate _strip_mdv2 import in
send_message_tool.py
Other fixes:
- hermes_cli/doctor.py: Replaced undefined logger.debug() with pass
- hermes_cli/config.py: Consolidated chained .endswith() calls
Test results: 3934 passed, 17 failed (all pre-existing on main),
19 skipped. Zero regressions.
* feat: switch managed browser provider from Browserbase to Browser Use
The Nous subscription tool gateway now routes browser automation through
Browser Use instead of Browserbase. This commit:
- Adds managed Nous gateway support to BrowserUseProvider (idempotency
keys, X-BB-API-Key auth header, external_call_id persistence)
- Removes managed gateway support from BrowserbaseProvider (now
direct-only via BROWSERBASE_API_KEY/BROWSERBASE_PROJECT_ID)
- Updates browser_tool.py fallback: prefers Browser Use over Browserbase
- Updates nous_subscription.py: gateway vendor 'browser-use', auto-config
sets cloud_provider='browser-use' for new subscribers
- Updates tools_config.py: Nous Subscription entry now uses Browser Use
- Updates setup.py, cli.py, status.py, prompt_builder.py display strings
- Updates all affected tests to match new behavior
Browserbase remains fully functional for users with direct API credentials.
The change only affects the managed/subscription path.
* chore: remove redundant Browser Use hint from system prompt
* fix: upgrade Browser Use provider to v3 API
- Base URL: api/v2 -> api/v3 (v2 is legacy)
- Unified all endpoints to use native Browser Use paths:
- POST /browsers (create session, returns cdpUrl)
- PATCH /browsers/{id} with {action: stop} (close session)
- Removed managed-mode branching that used Browserbase-style
/v1/sessions paths — v3 gateway now supports /browsers directly
- Removed unused managed_mode variable in close_session
* fix(browser-use): use X-Browser-Use-API-Key header for managed mode
The managed gateway expects X-Browser-Use-API-Key, not X-BB-API-Key
(which is a Browserbase-specific header). Using the wrong header caused
a 401 AUTH_ERROR on every managed-mode browser session create.
Simplified _headers() to always use X-Browser-Use-API-Key regardless
of direct vs managed mode.
* fix(nous_subscription): browserbase explicit provider is direct-only
Since managed Nous gateway now routes through Browser Use, the
browserbase explicit provider path should not check managed_browser_available
(which resolves against the browser-use gateway). Simplified to direct-only
with managed=False.
* fix(browser-use): port missing improvements from PR #5605
- CDP URL normalization: resolve HTTP discovery URLs to websocket after
cloud provider create_session() (prevents agent-browser failures)
- Managed session payload: send timeout=5 and proxyCountryCode=us for
gateway-backed sessions (prevents billing overruns)
- Update prompt builder, browser_close schema, and module docstring to
replace remaining Browserbase references with Browser Use
- Dynamic /browser status detection via _get_cloud_provider() instead
of hardcoded env var checks (future-proof for new providers)
- Rename post_setup key from 'browserbase' to 'agent_browser'
- Update setup hint to mention Browser Use alongside Browserbase
- Add tests: CDP normalization, browserbase direct-only guard,
managed browser-use gateway, direct browserbase fallback
---------
Co-authored-by: rob-maron <132852777+rob-maron@users.noreply.github.com>
* feat(tools): add Firecrawl cloud browser provider
Adds Firecrawl (https://firecrawl.dev) as a cloud browser provider
alongside Browserbase and Browser Use. All browser tools route through
Firecrawl's cloud browser via CDP when selected.
- tools/browser_providers/firecrawl.py — FirecrawlProvider
- tools/browser_tool.py — register in _PROVIDER_REGISTRY
- hermes_cli/tools_config.py — add to onboarding provider picker
- hermes_cli/setup.py — add to setup summary
- hermes_cli/config.py — add FIRECRAWL_BROWSER_TTL config
- website/docs/ — browser docs and env var reference
Based on #4490 by @developersdigest.
Co-Authored-By: Developers Digest <124798203+developersdigest@users.noreply.github.com>
* refactor: simplify FirecrawlProvider.emergency_cleanup
Use self._headers() and self._api_url() instead of duplicating
env-var reads and header construction.
* fix: recognize Firecrawl in subscription browser detection
_resolve_browser_feature_state() now handles "firecrawl" as a direct
browser provider (same pattern as "browser-use"), so hermes setup
summary correctly shows "Browser Automation (Firecrawl)" instead of
misreporting as "Local browser".
Also fixes test_config_version_unchanged assertion (11 → 12).
---------
Co-authored-by: Developers Digest <124798203+developersdigest@users.noreply.github.com>
Cherry-picked from PR #5136 by thakoreh.
setup_gateway() uses shutil.which('uv') at line 2126 but shutil was
never imported at module level, causing NameError during Matrix E2EE
auto-install. Adds top-level import and regression test.
The Anthropic SDK appends /v1/messages to the base_url, so OpenCode's
base URL https://opencode.ai/zen/go/v1 produced a double /v1 path
(https://opencode.ai/zen/go/v1/v1/messages), causing 404s for MiniMax
models. Strip trailing /v1 when api_mode is anthropic_messages.
Also adds MiMo-V2-Pro, MiMo-V2-Omni, and MiniMax-M2.5 to the OpenCode
Go model lists per their updated docs.
Fixes#4890
OpenCode Zen and Go are mixed-API-surface providers — different models
behind them use different API surfaces (GPT on Zen uses codex_responses,
Claude on Zen uses anthropic_messages, MiniMax on Go uses
anthropic_messages, GLM/Kimi on Go use chat_completions).
Changes:
- Add normalize_opencode_model_id() and opencode_model_api_mode() to
models.py for model ID normalization and API surface routing
- Add _provider_supports_explicit_api_mode() to runtime_provider.py
to prevent stale api_mode from leaking across provider switches
- Wire opencode routing into all three api_mode resolution paths:
pool entry, api_key provider, and explicit runtime
- Add api_mode field to ModelSwitchResult for propagation through the
switch pipeline
- Consolidate _PROVIDER_MODELS from main.py into models.py (single
source of truth, eliminates duplicate dict)
- Add opencode normalization to setup wizard and model picker flows
- Add opencode block to _normalize_model_for_provider in CLI
- Add opencode-zen/go fallback model lists to setup.py
Tests: 160 targeted tests pass (26 new tests covering normalization,
api_mode routing per provider/model, persistence, and setup wizard
normalization).
Based on PR #3017 by SaM13997.
Co-authored-by: SaM13997 <139419381+SaM13997@users.noreply.github.com>
Setup wizard now shows existing allowed_users when reconfiguring a
platform and preserves them if the user presses Enter. Previously the
wizard would display a misleading "No allowlist set" warning even when
the .env still held the original IDs.
Also downgrades the "provider X has no API key configured" log from
WARNING to DEBUG in resolve_provider_client — callers already handle
the None return with their own contextual messages. This eliminates
noisy startup warnings for providers in the fallback chain that the
user never configured (e.g. minimax).
* feat(auth): add same-provider credential pools and rotation UX
Add same-provider credential pooling so Hermes can rotate across
multiple credentials for a single provider, recover from exhausted
credentials without jumping providers immediately, and configure
that behavior directly in hermes setup.
- agent/credential_pool.py: persisted per-provider credential pools
- hermes auth add/list/remove/reset CLI commands
- 429/402/401 recovery with pool rotation in run_agent.py
- Setup wizard integration for pool strategy configuration
- Auto-seeding from env vars and existing OAuth state
Co-authored-by: kshitijk4poor <82637225+kshitijk4poor@users.noreply.github.com>
Salvaged from PR #2647
* fix(tests): prevent pool auto-seeding from host env in credential pool tests
Tests for non-pool Anthropic paths and auth remove were failing when
host env vars (ANTHROPIC_API_KEY) or file-backed OAuth credentials
were present. The pool auto-seeding picked these up, causing unexpected
pool entries in tests.
- Mock _select_pool_entry in auxiliary_client OAuth flag tests
- Clear Anthropic env vars and mock _seed_from_singletons in auth remove test
* feat(auth): add thread safety, least_used strategy, and request counting
- Add threading.Lock to CredentialPool for gateway thread safety
(concurrent requests from multiple gateway sessions could race on
pool state mutations without this)
- Add 'least_used' rotation strategy that selects the credential
with the lowest request_count, distributing load more evenly
- Add request_count field to PooledCredential for usage tracking
- Add mark_used() method to increment per-credential request counts
- Wrap select(), mark_exhausted_and_rotate(), and try_refresh_current()
with lock acquisition
- Add tests: least_used selection, mark_used counting, concurrent
thread safety (4 threads × 20 selects with no corruption)
* feat(auth): add interactive mode for bare 'hermes auth' command
When 'hermes auth' is called without a subcommand, it now launches an
interactive wizard that:
1. Shows full credential pool status across all providers
2. Offers a menu: add, remove, reset cooldowns, set strategy
3. For OAuth-capable providers (anthropic, nous, openai-codex), the
add flow explicitly asks 'API key or OAuth login?' — making it
clear that both auth types are supported for the same provider
4. Strategy picker shows all 4 options (fill_first, round_robin,
least_used, random) with the current selection marked
5. Remove flow shows entries with indices for easy selection
The subcommand paths (hermes auth add/list/remove/reset) still work
exactly as before for scripted/non-interactive use.
* fix(tests): update runtime_provider tests for config.yaml source of truth (#4165)
Tests were using OPENAI_BASE_URL env var which is no longer consulted
after #4165. Updated to use model config (provider, base_url, api_key)
which is the new single source of truth for custom endpoint URLs.
* feat(auth): support custom endpoint credential pools keyed by provider name
Custom OpenAI-compatible endpoints all share provider='custom', making
the provider-keyed pool useless. Now pools for custom endpoints are
keyed by 'custom:<normalized_name>' where the name comes from the
custom_providers config list (auto-generated from URL hostname).
- Pool key format: 'custom:together.ai', 'custom:local-(localhost:8080)'
- load_pool('custom:name') seeds from custom_providers api_key AND
model.api_key when base_url matches
- hermes auth add/list now shows custom endpoints alongside registry
providers
- _resolve_openrouter_runtime and _resolve_named_custom_runtime check
pool before falling back to single config key
- 6 new tests covering custom pool keying, seeding, and listing
* docs: add Excalidraw diagram of full credential pool flow
Comprehensive architecture diagram showing:
- Credential sources (env vars, auth.json OAuth, config.yaml, CLI)
- Pool storage and auto-seeding
- Runtime resolution paths (registry, custom, OpenRouter)
- Error recovery (429 retry-then-rotate, 402 immediate, 401 refresh)
- CLI management commands and strategy configuration
Open at: https://excalidraw.com/#json=2Ycqhqpi6f12E_3ITyiwh,c7u9jSt5BwrmiVzHGbm87g
* fix(tests): update setup wizard pool tests for unified select_provider_and_model flow
The setup wizard now delegates to select_provider_and_model() instead
of using its own prompt_choice-based provider picker. Tests needed:
- Mock select_provider_and_model as no-op (provider pre-written to config)
- Call _stub_tts BEFORE custom prompt_choice mock (it overwrites it)
- Pre-write model.provider to config so the pool step is reached
* docs: add comprehensive credential pool documentation
- New page: website/docs/user-guide/features/credential-pools.md
Full guide covering quick start, CLI commands, rotation strategies,
error recovery, custom endpoint pools, auto-discovery, thread safety,
architecture, and storage format.
- Updated fallback-providers.md to reference credential pools as the
first layer of resilience (same-provider rotation before cross-provider)
- Added hermes auth to CLI commands reference with usage examples
- Added credential_pool_strategies to configuration guide
* chore: remove excalidraw diagram from repo (external link only)
* refactor: simplify credential pool code — extract helpers, collapse extras, dedup patterns
- _load_config_safe(): replace 4 identical try/except/import blocks
- _iter_custom_providers(): shared generator for custom provider iteration
- PooledCredential.extra dict: collapse 11 round-trip-only fields
(token_type, scope, client_id, portal_base_url, obtained_at,
expires_in, agent_key_id, agent_key_expires_in, agent_key_reused,
agent_key_obtained_at, tls) into a single extra dict with
__getattr__ for backward-compatible access
- _available_entries(): shared exhaustion-check between select and peek
- Dedup anthropic OAuth seeding (hermes_pkce + claude_code identical)
- SimpleNamespace replaces class _Args boilerplate in auth_commands
- _try_resolve_from_custom_pool(): shared pool-check in runtime_provider
Net -17 lines. All 383 targeted tests pass.
---------
Co-authored-by: kshitijk4poor <82637225+kshitijk4poor@users.noreply.github.com>
setup_model_provider() had 800+ lines of duplicated provider handling
that reimplemented the same credential prompting, OAuth flows, and model
selection that hermes model already provides via the _model_flow_*
functions. Every new provider had to be added in both places, and the
two implementations diverged in config persistence (setup.py did raw
YAML writes, _set_model_provider, and _update_config_for_provider
depending on the provider — main.py used its own load/save cycle).
This caused the #4172 bug: _model_flow_custom saved config to disk but
the wizard's final save_config(config) overwrote it with stale values.
Fix: extract the core of cmd_model() into select_provider_and_model()
and have setup_model_provider() call it. After the call, re-sync the
wizard's config dict from disk. Deletes ~800 lines of duplicated
provider handling from setup.py.
Also fixes cmd_model() double-AuthError crash on fresh installs with
no API keys configured.
OPENAI_BASE_URL was written to .env AND config.yaml, creating a dual-source
confusion. Users (especially Docker) would see the URL in .env and assume
that's where all config lives, then wonder why LLM_MODEL in .env didn't work.
Changes:
- Remove all 27 save_env_value("OPENAI_BASE_URL", ...) calls across main.py,
setup.py, and tools_config.py
- Remove OPENAI_BASE_URL env var reading from runtime_provider.py, cli.py,
models.py, and gateway/run.py
- Remove LLM_MODEL/HERMES_MODEL env var reading from gateway/run.py and
auxiliary_client.py — config.yaml model.default is authoritative
- Vision base URL now saved to config.yaml auxiliary.vision.base_url
(both setup wizard and tools_config paths)
- Tests updated to set config values instead of env vars
Convention enforced: .env is for SECRETS only (API keys). All other
configuration (model names, base URLs, provider selection) lives
exclusively in config.yaml.
Camofox-browser is a self-hosted Node.js server wrapping Camoufox
(Firefox fork with C++ fingerprint spoofing). When CAMOFOX_URL is set,
all 11 browser tools route through the Camofox REST API instead of
the agent-browser CLI.
Maps 1:1 to the existing browser tool interface:
- Navigate, snapshot, click, type, scroll, back, press, close
- Get images, vision (screenshot + LLM analysis)
- Console (returns empty with note — camofox limitation)
Setup: npm start in camofox-browser dir, or docker run -p 9377:9377
Then: CAMOFOX_URL=http://localhost:9377 in ~/.hermes/.env
Advantages over Browserbase (cloud):
- Free (no per-session API costs)
- Local (zero network latency for browser ops)
- Anti-detection at C++ level (bypasses Cloudflare/Google bot detection)
- Works offline, Docker-ready
Files:
- tools/browser_camofox.py: Full REST backend (~400 lines)
- tools/browser_tool.py: Routing at each tool function
- hermes_cli/config.py: CAMOFOX_URL env var entry
- tests/tools/test_browser_camofox.py: 20 tests
Setup previously only printed a manual install hint for matrix-nio,
causing the gateway to crash with 'matrix-nio not installed' after
configuring Matrix. Now auto-installs matrix-nio (or matrix-nio[e2e]
when E2EE is enabled) using the same uv-first/pip-fallback pattern
as Daytona and Modal backends.
Also adds hermes-agent[matrix] to the [all] extra in pyproject.toml
and a regression test to keep it there.
Co-authored-by: Gutslabs <Gutslabs@users.noreply.github.com>
Co-authored-by: cutepawss <cutepawss@users.noreply.github.com>
All three Nous Portal model selection paths (hermes model, first-time
login, setup wizard) were hitting the live /models endpoint and showing
every model available — potentially hundreds. Now uses the curated
_PROVIDER_MODELS['nous'] list (25 agentic models matching OpenRouter
defaults) with 'Enter custom model name' for anything else.
Fixed in:
- hermes_cli/main.py: _model_flow_nous()
- hermes_cli/auth.py: _login_nous() model selection
- hermes_cli/setup.py: post-login model selection
When a user runs 'hermes update', the Python process caches old modules
in sys.modules. After git pull updates files on disk, lazy imports of
newly-updated modules fail because they try to import display_hermes_home
from the cached (old) hermes_constants which doesn't have the function.
This specifically broke the gateway auto-restart in cmd_update — importing
hermes_cli/gateway.py triggered the top-level 'from hermes_constants
import display_hermes_home' against the cached old module. The ImportError
was silently caught, so the gateway was never restarted after update.
Users with a running gateway then hit the ImportError on their next
Telegram/Discord message when the stale gateway process lazily loaded
run_agent.py (new version) which also had the top-level import.
Fixes:
- hermes_cli/gateway.py: lazy import at call site (line 940)
- run_agent.py: lazy import at call site (line 6927)
- tools/terminal_tool.py: lazy imports at 3 call sites
- tools/tts_tool.py: static schema string (no module-level call)
- hermes_cli/auth.py: lazy import at call site (line 2024)
- hermes_cli/main.py: reload hermes_constants after git pull in cmd_update
Also fixes 4 pre-existing test failures in test_parse_env_var caused by
NameError on display_hermes_home in terminal_tool.py.
Prep for profiles: user-facing messages now use display_hermes_home() so
diagnostic output shows the correct path for each profile.
New helper: display_hermes_home() in hermes_constants.py
12 files swept, ~30 user-facing string replacements.
Includes dynamic TTS schema description.
Adds Exa (https://exa.ai) as a fourth web backend alongside Parallel,
Firecrawl, and Tavily. Follows the exact same integration pattern:
- Backend selection: config web.backend=exa or auto-detect from EXA_API_KEY
- Search: _exa_search() with highlights for result descriptions
- Extract: _exa_extract() with full text content extraction
- Lazy singleton client with x-exa-integration header
- Wired into web_search_tool and web_extract_tool dispatchers
- check_web_api_key() and requires_env updated
- CLI: hermes setup summary, hermes tools config, hermes config show
- config.py: EXA_API_KEY in OPTIONAL_ENV_VARS with metadata
- pyproject.toml: exa-py>=2.9.0,<3 in dependencies
Salvaged from PR #1850.
Co-authored-by: louiswalsh <louiswalsh@users.noreply.github.com>
Drop the swe-rex dependency for Modal terminal backend and use the
Modal SDK directly (Sandbox.create + Sandbox.exec). This fixes:
- AsyncUsageWarning from synchronous App.lookup() in async context
- DeprecationError from unencrypted_ports / .url on unencrypted tunnels
(deprecated 2026-03-05)
The new implementation:
- Uses modal.App.lookup.aio() for async-safe app creation
- Uses Sandbox.create.aio() with 'sleep infinity' entrypoint
- Uses Sandbox.exec.aio() for direct command execution (no HTTP server
or tunnel needed)
- Keeps all existing features: persistent filesystem snapshots,
configurable resources (CPU/memory/disk), sudo support, interrupt
handling, _AsyncWorker for event loop safety
Consistent with the Docker backend precedent (PR #2804) where we
removed mini-swe-agent in favor of direct docker run.
Files changed:
- tools/environments/modal.py - core rewrite
- tools/terminal_tool.py - health check: modal instead of swerex
- hermes_cli/setup.py - install modal instead of swe-rex[modal]
- pyproject.toml - modal extra: modal>=1.0.0 instead of swe-rex[modal]
- scripts/kill_modal.sh - grep for hermes-agent instead of swe-rex
- tests/ - updated for new implementation
- environments/README.md - updated patches section
- website/docs - updated install command
Siddharth Balyan
Teknium
kshitij
MaHaoHao-ch
alt-glitch
SHL0MS
nftpoetrist
Ari Lotter
Scott Trinh
hengm3467
Teknium
IAvecilla
helix4u
WideLee
emozilla
Mil Wang (from Dev Box)
walli
Junjun Zhang
arthurbr11
alt-glitch
jjovalle99
jamesarch
kshitijk4poor
Carlos
Ben Barclay
Austin Pickett
thakoreh
Octopus
Robin Fernandes